OEM Mopar Mouldings & Trim Parts
FAQs About Jeep DIY Trim and Molding Replacements
Time for an exterior upgrade for your Jeep? Our online Mopar store supplies owners with the right fitted trim molding for a refreshed look. Save up to 35% off the MSRP and get your new molding pieces for your Jeep delivered ASAP, anywhere in the country.
Console Clip
Clip / Spring Nut
Molding, Body Side, Chrome
No results found for "moulding -bolt -nut -bushing -bracket -module -mount -absorber -wrench, molding -bolt nut -bushing -bracket -module -mount -absorber -wrench". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
How Expensive Are Jeep Roof Molding Replacements?
The cost of replacing roof moldings on your Jeep can vary depending on the model and year. For popular models like the Jeep Wrangler or Renegade, OEM roof moldings typically range between $50 to $150 per piece. If you are looking for a complete roof molding set, prices may go up to $300 or more. It's advisable to invest in genuine Jeep parts to ensure a perfect fit and long-lasting durability.
How Do I Install My Jeep Renegade Roof Molding?
Installing roof molding on a Jeep Renegade is a straightforward process. Begin by removing the old molding, ensuring any adhesive residue is cleaned off. Align the new molding piece with the roof slots and press firmly into place. For the best results, it’s recommended to use a trim adhesive for additional security. This DIY job typically takes under an hour and requires basic tools like a trim removal tool, cleaning solvent, and adhesive.
How Complicated is a Jeep Grand Cherokee Fog light Bracket Replacement, and What Tools Do I Need?
Replacing the fog light bracket on a Jeep Grand Cherokee is a moderately challenging task. The job requires removing the front bumper cover to access the bracket. Essential tools include a socket wrench, flathead screwdriver, and trim removal tool. The process can take around 1-2 hours depending on your experience with vehicle repairs. Always disconnect the battery before starting to avoid any electrical issues.
How Do I Replace the Door Hex Nuts on My Old Jeep Wrangler?
Replacing door hex nuts on an older Jeep Wrangler is a simple task that can be done in about 15-30 minutes. Use a Torx bit socket to remove the existing hex nuts. After removing them, align the door properly and insert the new nuts, tightening them securely. Make sure to check door alignment after installation to ensure a proper seal.